How to setup:
1. Clear the password: hold down the A and B keys with two fingers at the same time; the LED light flashes quickly 3 times within about 2 seconds; release one finger (the other hand cannot be released), and then use the released finger Quickly click three times on the released button until the LED indicator flashes quickly; two fingers can be released; then press any key on the remote control; when the LED indicator is off, it means that the code is cleared successfully (all four keys are Empty); If the indicator light is still on after pressing any button on the remote control, it means that the original code was not successfully cleared. You need to clean up again. Only when the code is successfully cleaned can the clone be successfully cloned. You can repeatedly clean and clone the code.
2. Copy: left hand taking the original remote control, right hand taking our cloned remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash quickly 2 times; after one second, the indicator light keeps flashing and let go of your fingers; and then press the key after successful study, the light keeps on, which means that the first key code on original remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key... If the copy is successful, the remote control function is the same as the original matching remote control.
3. Restore: When you accidentally clear the copy of the remote control code, you can simultaneously press the copy of the remote control of the bottom two keys, LED lights will flash quickly, let go after pressing any key, light long, this Indicating that the code for the remote control is restored. Before using our duver remote control, please be sure to remove the existing code from the remote control.
Package included:
1 * Wireless Remote Control
#SMC5326 #5326 #330Mhz #433Mhz #8 #Dip #Switch #Auto #Garage #Duplicate #Remote #Control #Duplicate
How to Program
Remote-to-remote programming:
1. Open the casing of your already-programmed remote.
2. You will see a row of small programmable numbered switches. They are in the ON or OFF position.
3. Open the casing of your new remote.
4. You will see a row of small programmable numbered switches.
5. Set them in the same way as those set in your already-programmed remote.
6. Your new remote control is programmed.
Package list: 1 remote control (including battery and keychain)
If you are not sure Whether it can be used,Please send your inside PCB board photo to check the frequency before order.
4 Channel Remote Control:
Material: Plastic.
Color: As pictures show.
Type: Wireless remote.
For: Such as electric telescopic door remote control, road gate remote control, alarm remote control and so on.
Rated voltage: 12V 27A Battery.
Wireless transmission distance: 50-150 (m). (open space)
This wireless remote control is in either 330 MHz or 433 MHz. It commonly uses for Auto-gate, Garage door opener or Alarm system. Users need to clone the code from the existing remote control before using.
Types of chip models that can be copied:
FP527, EV1527, HS1527, EV1528 all series compatible models, PT2240 all series and compatible models, PT2260, HS2260, SC2260, PT2262, HS2262, SC2262 all series and compatible models, HT6P12E, HT6P20D, etc., SMC918, VD5326 dial code, CAME imported brand
Please make sure that your remote control with upper chip and 330 MHz or 433 MHz before buying, otherwise, it won't be compatible with our products.
433MHz 8 DIP Switch Fixed Code 330MHz Duplicate Remote Control for Gate or Alarm System
Audited Supplier 
){kind=link}