Working voltage: 23a
Operating current: less than 8mA
Frequency model:868MHZ
The transmission power: less than 100mW
Emission distance: 50 to 100 m (proof)
The encoding type: self Copy
The working temperature: -10°C to + 50°C
Copy chip remote:2262.2260.5026.5326.3.5326.4.FP527.PT2240.eV1527.HT6010.HT6014.HT12E,etc
Uses: garage doors, motorcycles, car alarm products, home security products,
short-range wireless remote control products, industrial control products
Features:
1. One to one key copy
2. Each key password alone save
3. Can continuous repetitive copy use one million times
4. Privacy is strong
Package includes:
1pcs x Face to Face Copy Remote Wireless Communication :RF
Operation method:
1. Code pairing (learning) Place the original remote control and the copy remote control as close as possible, first press a button of the original remote control, and immediately after the indicator light turns on, press and hold a button of the self-copy remote control for about three seconds, the LED will flash 3 times and then quickly Flashing, it means that the address code of the original remote control button has been learned successfully. The other keys are operated in the same way for learning.
2. Clear code Press the "UP" button and the "DOWN" button at the same time for 2 seconds, the LED light starts to flash quickly. The code has been cleared. Test whether the existing code of the remote control has been successfully cleared: When you finish the clearing action, you can press any button of the copy remote control. If the LED only flash once at this time, that means The original code of the copied remote control has been completely cleared. If the LED still flashes quickly and immediately, the code still exists and needs to be cleared again.
3. Restore the cleared code The copy remote control has a recovery function. If you accidentally clear the address code of the normal copy remote control during use, you can press the next two buttons on the remote control at the same time. After about three seconds, the LED will flash quickly, which means that the cleared address code is successfully restored.
Precautions:
1. Before using our remote control duplicator to copy, first clear the existing code of your exisiting remote control.
2. The self-learing remote control duplicator cannot copy rolling codes, such as HCS301.
Note: 1. There may be slight size deviations due to manual measurement, different measuring methods and tools. 2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor. |