Remote Control Function
1. Learning methods
1. Self-locking learning method: After power-on, press and hold the learning button of the receiving board.
Press and hold the remote control button that needs to be learned within 6 seconds, and the LED on the receiving board flashes twice
Prove that this key was successfully learned.
2. Point-and-click learning method: After power-on, press and hold the learning button of the receiving board, LED flash 2 times to release.
Press and hold the remote control button that needs to be learned within 6 seconds, and the LED on the receiving board flashes twice
Prove that this key was successfully learned.
3. Interlock learning method: After power-on, press and hold the learning button of the receiving board, LED flash 3 times to release.
Press and hold the remote control button that needs to be learned within 6 seconds, and the LED on the receiving board flashes twice
Prove that this key was successfully learned.
2. Change the method
Self-locking: Power state press and hold the learning button LED flash 1 release (press A to open, then press A to close, And so on)
Click: Power state press and hold the learning button LED flash 2 times release (press A to open, release A off, And so on)
Interlock: Power state press and hold the learning button LED flash 3 times release (press A to open, B to close, B to open, Stage A)
3. Clearing method
Clear code: Press and hold the learning button and do not put the LED flash 4 times and then flash 2 times to release, the clearing operation is complete. The following is a multi-key remote control to control multiple receivers to set single-key full on and full off learning methods, the total open and total off to operate in the self-locking state.
Always open learning method: in the standby state, press the receiver learning button twice, hold down the corresponding button of the remote control within 6 seconds, and the LED on the receiving board flashes twice to learn successfully.
Normal shutdown learning method: In the standby state, press the receiver learning button 3 times, hold down the corresponding button of the remote control within 6 seconds, and the LED on the receiving board flashes 2 times to learn successfully.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}